Download HCIA-Datacom V1-0.H12-811.VCEplus.2024-12-05.116q.vcex
| Vendor: | Huawei |
| Exam Code: | H12-811 |
| Exam Name: | HCIA-Datacom V1-0 |
| Date: | Dec 05, 2024 |
| File Size: | 1 MB |
| Downloads: | 1 |
How to open VCEX files?
Files with VCEX extension can be opened by ProfExam Simulator.
Discount: 20%
Demo Questions
Question 1
The network shown in the figure below. The router receives a data packet with a destination IP address of 11.0.12.1 from host A. After this data is forwarded by the router, what are the destination MAC and destination IP?)(Single-choice question)
- MAC-C. 11.0.12.1
- MAC-B. 11.0.12.1
- MAC-D. 10.0.12.2
- MAC-D. 11.0.12.1
Correct answer: B
Question 2
The output information of the STP port of a certain switch is shown in the figure. Which of the following statements is wrong? () (Single-choice question)
[Huawei]display stp interface Ethernet 0/0/1
-------[CIST Global Info][Mode STP]-------
CIST Bridge: 32768.4c1f-cc46-4618
Config TimesHello 4s MaxAge 20s FwDly 15s MaxHop 20
Active Times:Hello 2s MaxAge 20s FwDly 15s MaxHop 20
CIST Root/ERPC:0.4c1f-ccf7-3214/200000
CIST RegRoot/IRPC: 32768.4c1f-cc46-4d18/0
- Forward-delay is 20s
- Configure the MaxAge of the BPDU to 20s
- The period for sending configuration BPDUs on this port is 2s
- The switch is not a root bridge
Correct answer: A
Question 3
Using the command mkdirtest in the VRP operating platform, the system will create a directory named test. ()
- True
- False
Correct answer: A
Question 4
There are multiple route entries to the same destination network in the routing table. These routes are called? ()
- Suboptimal routing
- Multipath routing
- Default route
- Equal cost routing
Correct answer: D
Question 5
What is the priority value of the direct route entry? ()
- 0
- 30
- 10
- 20
Correct answer: A
Question 6
As shown in the figure below. Host A and Host B cannot communicate. ()(True or False)
- True
- False
Correct answer: B
Question 7
What is wrong about the description of the information as shown in the figure? () (Single-choice question)
(RI) display interface g0/0/0
GlgabltEtherneto/0/0 current state :Adainistratively DOWN Line protocol current state :DOWN
- GigbitEthernet (/0/0 interface is connected to a wrong cable
- The GigbitEthernet0/0/0 interface is not configured with an IP address
- The GigbitEthernet0/0/0 interface was manually closed by the administrator
- GigbitEthernet (0/0/0 interface does not enable dynamic routing protocol
Correct answer: C
Question 8
As shown in the figure, the switch runs STP with default parameters. Which of the following ports will be elected as the designated port? () (Single-choice question)
- Port G0/0/1 of switch A
- HUB's G0/0/1 port
- HUB's G0/0/2 port
- Port G0/0/2 of switch A
Correct answer: A
Question 9
The ACL configuration information of a certain router is shown in the figure. Which of the following statements is correct? () (Single-choice question)
- The packet whose source IP address is 192.168.1.254 is matched by the permit rule
- Packets with source IP addresses of 192.168.1.1 and 192.168.1.254 are matched by the permit rule
- The packet with the source IP address of 192.168.1.1 is matched by the pemit rule
- The packet with the source IP address 192.168.1.1 is matched by the deny rule
Correct answer: C
Question 10
The administrator made the configuration on the router as shown in the figure. At the same time, the administrator wants to assign a shorter lease period to the DHCP address. Which of the following commands should be used? () (Single-choice question) ip pool pooll netyork10.10.10.0ask255.255.255.0 gateway-list 10.10.10.1
- Lease 0
- Dhcp select relay
- Lease day 0 hour 10
- Lease 24
Correct answer: C
HOW TO OPEN VCE FILES
Use VCE Exam Simulator to open VCE files
HOW TO OPEN VCEX AND EXAM FILES
Use ProfExam Simulator to open VCEX and EXAM files
ProfExam at a 20% markdown
You have the opportunity to purchase ProfExam at a 20% reduced price
Get Now!